Service Hotline: 13306194744 13503087006

Product Detail

Product Detail

Hot regeneration equipment

Hot regeneration equipment

Asphalt hot recycling equipment is a complete set of specialized equipment for crushing, screening, high-temperature drying and heating, aging asphalt activation, precise proportioning, and high-temperature forced mixing of waste asphalt pavement milling and planing materials (RAP). It can be independently packaged or installed as an external module in traditional intermittent asphalt mixing plants to achieve collaborative production of new and old materials.

Hotline: 13306194744 13503087006

Inquire Now
Core features: RAP material is modified and activated by high-temperature heating and rejuvenator, reducing the performance of aged asphalt and producing hot mix recycled asphalt mixture. The finished product fully meets the requirements for the use of high-grade road surfaces such as upper, middle, and lower layers.
Complete workflow process:
1. Scrap asphalt milling RAP material → loaded onto the loader and stored in the recycling bin;
2. Qualified cold RAP materials are sent to a dedicated regeneration drying drum for low-temperature gradient heating, drying, and dehumidification;
3. The heated high-temperature regenerated material is lifted, transported in a closed manner, and accurately measured dynamically;
4. The measured hot recycled raw material enters the mixing area, where it is atomized and sprayed with asphalt rejuvenator to complete the activation and repair of aged asphalt;
5. According to the design ratio, it is forcibly mixed with high-temperature fresh crushed stone, native hot asphalt, and mineral powder in a double horizontal shaft mixing tank at high temperature;
6. After thorough mixing, produce high-quality hot recycled asphalt mixture;
7. Finished materials are temporarily stored in the finished goods warehouse, loaded in a closed container, and directly used for road paving and compaction.

Supporting mixing plant capacity: 200t/h to 400t/h, fully covered

Regeneration system capacity: 80t/h~200t/h

RAP reasonable blending ratio: 30% to 50% for high blending models

Regenerated material heating temperature: 120 ℃~165 ℃ adjustable constant temperature control

Measurement accuracy: Recycled aggregate ≤± 1%

Applicable RAP particle size: 0-25mm (standard grading)

Total installed power: 100kW~160kW (configured according to production capacity)

Control mode: fully automatic PLC linkage+manual on-site control

Emission standards: comply with the environmental protection ultra-low emission standards of the road asphalt mixing industry